Specialty Polyurethane Blue Rear Squeegee Blade For Rubber Floors (#8118002) On The Trusted Clean ‘Dura 18HD’ Floor Scrubber

This rear squeegee blade is made specifically for use with the Trusted Clean ‘Dura 18HD’ electric automatic floor scrubber. The special urethane blade is ideal for rubber like floors due to its high abrasion resistance, high cut and tear resistance, and improved surface contact, which are all advantages over traditional rubber squeegees.

When paired with the front urethane squeegee, your machine will be able to recover close to 100% of your solution as you can get. Both blades can be used on all 4 sides and should be rotated frequently (about every 20 hours of scrubbing) to avoid uneven wear patterns.

**Please Note – This polyurethane blade is great for recovery on rough floors and is of much higher quality than the standard front rubber squeegee that comes with the machine.

How to Rotate / Change Out Your Squeegees

1. Loosen middle 2 wing nuts on squeegee assembly & remove the squeegee assembly from the machine.
2. Completely remove all 4 wing nuts from the squeegee assembly.
3. Loosen & remove rear tension bar by sliding the bracket down & removing it completely from the squeegee assembly.
4. Remove & rotate or flip both squeegees.
5. Reassemble & reattach.