Slotted Front Latex Squeegee Blade For CleanFreak® Reliable 14″ Auto Scrubbers

This slotted red latex front replacement squeegee blade fits perfectly onto the CleanFreak® Reliable 14B & 14E line of automatic floor scrubbers. This red latex squeegee is slotted to allow solution through it, and into the recovery chamber, which is backed by the rear replacement squeegee. Both of these squeegees should be wiped clean after each use to maximize longevity and reduce streaking. The squeegees should also be rotated and replaced frequently to make sure your floor is dry to the touch after the squeegee assembly passes over it. Each squeegee blade measures 17″ long to to follow behind the scrubber’s 14″ inch and make sure all of the laid down solution is recovered.

Each squeegee blade can be used in all four directions for increased lifespan. You can use the front side of the squeegee, then rotate, so the back side is facing forward. Then, you can flip it upside down, and use both of those surfaces. This squeegee system is revolutionary, because of how easy it is to change your squeegees. No tools are required to switch your blades, and can easily be done within a few minutes. We recommend rotating your squeegees every 20 hours of scrubbing, so they wear evenly.