IPC Eagle CT230 Auto Scrubber Rear Squeegee Blade (#MPVR05886) – Red Latex

This rear replacement squeegee blade is made to be paired with the front squeegee on the squeegee assembly of the IPC Eagle CT230 ridding floor scrubber. This assembly creates a vacuum to suck up the solution that has been laid down by the floor scrubber. The rear squeegee blade’s main job is to stop the solution and direct it to the recovery hose. With new front and rear squeegees, your floor scrubber should leave your floors streak-free and dry to the touch.

Each squeegee blade (front & rear) can be used on all four sides for the recovery of scrubbed solutions. You can use the front side of the squeegee, then rotate it, so the backside is facing forward. Then, you can flip it upside down, and use both of those surfaces. No tools are required to switch your blades, and we recommend doing it often. Cleaning each blade after each use (at least wiping them down), will prevent streaking & extend their life expectancy. We recommend rotating your squeegees every 20 hours of scrubbing, so they wear evenly and last longer.