16″ IPC Eagle Floor Scrubbing Brush (#SPPV02648) For 32″ CT90, CT105 & CT110 Auto Scrubbers – 2 Required

These 16″ nylon brushes fit onto these 32″ automatic floor scrubbers (CT90 & CT105 walk behind scrubbers, as well as the CT110 rider scrubber). Those 32″ walk behind scrubbers offer the largest scrubbing path of all the walk behind floor scrubbers that we have to offer. There are 2 brushes required to properly scrub with those machines. The two 16″ brushes cover a 32″ scrub path.

If you are new to the floor care industry, please take a look at our helps and tips area for instructions on how to properly scrub a floor with an auto scrubber.

We recommend using either our low foaming degreaser or our environmentally friendly green grout cleaner, depending on what type of floor you’re cleaning, and what your hoping to accomplish. If you need something with a little more cleaning power, or are looking to strip some floors, take a look at our 16″ tynex scrubber brushes.

*Please Note: This brush formally had a part # of EAG-SPPV00417 and EAG-SPPV01516.

Caring for your Nylon Brush

Rinse your nylon scrub brush with hot water for 5 to 10 minutes to help the nylon recover its form.